Tasks: Make a Copper Awl (Metal Tool)

Next

• (none right now)

Done

• Add a target geometry table (length, tip angle, shaft diameter by use-case).

• Add a maintenance/repair subsection.

• Add expected lifetime and failure mode notes.

• Initial article draft exists.

• Add forging sequence schematic.

• Fix diagram: glow drawn under the metal; prills rest on the anvil; awl shape no longer self-intersecting.

• Add Anneal Copper as prerequisite, linked from the "Anneal often" step.

• Add a "Terms used in this article" section (prill, billet, forging, work-hardening, anneal, hafting, hammerstone/anvil stone).